Call Toll Free: 800-457-4950
Home » Our Products » Controller » Configurable Controller, Cooking

Universal Cooking & Frying Controller

Model No. 5200 Description:
The model 5200 is Artisans latest cooking controller designed for food service equipment OEMs. It incorporates the latest packaging technology developed for maximum service life in the field. This unique designprovides dual relay outputs, one for the primary heating control, and the second which can be used for a circulation fan in convection ovens, rotisserie motor control for rotisserie ovens, or an automatic lift control in frying applications. The temperature control input is a 100 Ohm platinum RTD (385 DIN curve), J, K, T, or E thermocouples, or 2.5k or 5k thermistors and the measurement accuracy is ±5°F. The control hysteresis is adjustable from 3-20°F and is not user accessible.Simplified Time and Temperature Adjustment - Instead of the typical scrolling of times and temperatures using the up and down keys, this controller highlights the appropriate digit on the LED display and allows the user to move the highlight left or right and adjust the value with minimal keystrokes. Multiple Recipes – The 5200 offers six (6) built-in recipes, each with a preheat temperature, cooking temperature and time, and a holding temperature. Simply press one of the 6 buttons and the controller starts the preheating cycle for that recipe. Performance History - Normally found on more expensive controllers, this design stores its operational history in non-volatile memory and can report the information back to service personnel on the LED display. It stores up to 125 of the following critical items - RTD probe failure, system configuration change, full factory resets, input calibration, and excessive or insufficient heating.
Type Function Industries
Controller Configurable Controller, Cooking Food Service

Operating Voltage 115V AC or 230VAC, ±20%, 50/60 Hz
Mounting 2.63" square opening, 0.093" maximum corner radius. Single bracket and nut mounting into user's front panel for ease of installation and service. Sealing gaskets available. Backmounting version without overlay and with flat front face available.
Operating Mode Cooking, Frying or Universal (both).
Temperature Input 100 Ohm platinum RTD (385 DIN curve), or type J, K, T, or E, thermocouples.
Measurement Accuracy Better than ±5°F (without probe error).
Temperature Calibration Factory calibrated for probe type, temperature can be offset at any temperature.
Cycle Timing Accuracy Better than ±0.5%
Timing Cycle Indicators Three LEDs (P, C, and H) indicate the controller state in either cook or fry modes.
Operating Temperature 0°C to 70°C.
Agency Listing Certified to: UL 60730-1 & CSA E60730-1:13, Automatic Electrical Controls For Household And Similar Use - Part 1: General Requirements, UL 60730-2-9, PART 2-9 & CSA E60730-2-9:15, PART 2-9: Particular Requirements For Temperature Sensing Controls, UL file number E98134.
Contact Rating 120VAC 13A Resistive @ 100k cycles, 250VAC 10A Resistive @ 100k cycles, 125VAC 125VA Pilot Duty @ 100k cycles, 120VAC 2.5FLA / 15LRA @ 100k cycles

Terms & Conditions