Artisan - EPC-13199 7 Day Bell Controller

Description

The model EPC-13199 is an ideal bell controller for use in factories and schools. The EPC-13199 permits programming the exact time that the bell is to ring. In addition, the EPC-13199 permits programming the interval of the ring from 1 to 99 seconds. Once a daily pattern has been programmed, it will repeat every day of the week until reprogrammed. A major feature of the EPC-13199 is the smart timepiece circuit that continues keeping correct time and day, even when the power fails for up to a 10 years. This feature assures that the EPC-13199 will not have to be reprogrammed after every power failure. The EPC-13199 does not require any batteries to assure this feature.

Specifications

Operating Voltage	115V AC, 50/60 Hz.
Output Relay	20A SPDT, see PDF specifications for details
Timing Mode	24 Hour Programmable.
Timing Accuracy	Time-Of-Day to ą2 minutes per month.
Programmable Output	One (1) set of SPDT contacts. Contacts close at the pre-programmed bell ringing event time, open at the end of programmed interval.
Programmable Bell Events	56 programmable bell ringing events over a 24 hour period, each day identical
Programmable Bell Interval	1 to 99 seconds - starts at programmed time of day
Timing Tolerance	Based on the scheduled and displayed time-of-day.
Repeatability Of Event Timing	Based on the scheduled and displayed time-of-day.
Digital Display	Four (4) digit red LED, 0.5 inch high characters displays, time-of-day, and all bell ringing event programmed schedules.
Time-Of-Day	Displayed and set in 24 hour format. 6PM = 1800, 11PM = 2300 etc.. Time-Of-Day is maintained in a smart timepiece circuit that will keep the time running for up to 10 years during a power failure. No batteries required, or embedded in unit.
Program Memory	EEPROM type maintains the programmed schedules for up to 10 years without battery backup.
Front Panel Switches	Membrane tactile type keypad, 0 - 9, *, and #.
Transient Protection	Protected by silicon transient suppressors which respond to transients within 1 x 10-12 seconds to a peak pulse power dissipation of 1500 watts, with transient surge currents to 200 amperes for durations up to 1/120 second at 25 deg. C. Maximum transient voltage protection is 6000 volts as delivered through a source resistance of 30 ohms with a maximum duration of 8.3 milliseconds.
Operating Temperature	0 deg.C to +70 deg.C.
Construction	Metal enclosure with external keypad and knockout holes to facilitate wiring. Front panel cover plate is removed to expose wiring terminals.
Programming Handbook	A comprehensive handbook is supplied with each model. The handbook provides all instructions, with examples, necessary to operate and program the model EPC-13199.

EPC-13199 Specifications , click to view, right click - Save As ... to download.

Ordering Information

Model	Operating Voltage
EPC-13199	115VAC, 50/60 Hz