Description
The model EPC-12207 is an all solid state timer intended for use in
any application which requires an external load circuit to be energized for an interval of
time each time the start switch of the timer is momentarily pressed. The timing period is
set by a 32 position rotary switch which adjusts the timer from OFF to the maximum time
specified by the model number. As a complete timing assembly, the EPC-12207 is ready to
mount behind a front panel to form an integral timing controller.
Specifications
| Operating Voltage |
12, 24, 48, & 110V DC, 24, 48, 115V AC 50/60 Hz. |
| Output Rating |
Solid State Switch. AC units, loads from 10 milliamperes to
1.0 ampere inductive. DC units, loads from 5 milliamperes to 1/2 amperes. |
| Timing Mode |
Single Shot
Interval. |
| Transient Protection |
Zener type voltage limiting device and an MOV rated to 25
Joules in accordance with unit Input Voltage. |
| Operating Temperature |
-20 deg C to + 85 deg C. |
EPC-12207 Specifications , click to view,
right click - Save As ... to download.
Ordering Information
| Model |
Operating Voltage |
Time Range |
| EPC-12207 |
-2 12VDC
-6 24VAC
-3 24VDC -7 48VAC
-4 48VDC -8 115VAC
-5 110VDC |
Available in 15 ranges with 31 steps ranging
from 0.5 seconds to 1 hour increments. Please contact factory for assistance |
|
