Description
The model 4210 is an all Solid State flasher intended for use in AC circuits only. Capable
of flashing a load circuit up to one ampere at a fifty percent duty cycle. Output switch
is ON for as long as it is OFF. Flash rates from 1 flash per minute up to 300 flashes per
minute are available in five operating voltage ranges. The model 4210 has internal
transient protection devices to assure reliable operation even when driving inductive load
circuits such as relays or solenoids. (For DC flashers see the model 423).
Specifications
| Operating Voltage |
12, 24, 48, 115, 230V AC 50/60 Hz. |
| Output Rating |
10 milliamperes to 1.0 ampere inductive with inrush current
to 8 amperes for 8 milliseconds. |
| Timing Mode |
AC Flasher. |
| Flash Rate, Fixed |
1-300 Flashes per Minute. |
| Transient Protection |
Maximum transient voltage protection is 6000 volts as
delivered through a source resistance of 30 ohms with a maximum duration of 8.3
milliseconds. |
| Operating Temperature |
-20 deg C to + 85 deg C. |
 4210 Specifications
: click to view , right click - Save As ... to download.
: click to view , right click - Save As ... to download.
Ordering Information
| Model |
Operating Voltage |
Flash Rate |
| 4210 |
-12, -24, -48, -115, -230 VAC |
Specify in Flashes per Minute |
Example : 4210-115-60 operates on 115VAC at
a flash rate of 60 flashes per minute |
