Description
The 2411SA is an initiate switch controlled delay-on-make
timer controlling a SPDT set of relay contacts. The 2411SA is available in a range of
both AC and DC models. With operating voltage applied, the timer is in a
stand-by mode. Closure of the Initiate Switch begins the time delay, and
the end of which the output contacts transfer. The switch must be closed
for the entire time delay, and the output contacts de-energize when the
switch is opened. The 12 position DIP switches
allow for selection of time range and time period.
Specifications
| Timing Mode |
Delay-on-Make
- Initiate switch controlled |
| Operating Voltage |
12, 24V DC or AC, 115V AC. |
| Adjustable Timing Ranges |
0.1 - 102.4 seconds, 1 - 1024 seconds, 1
- 1024 minutes, 1 - 1024 hours. |
| Purchase Tolerance |
±2% |
| Repeatability Of Timing Periods |
Better than ±2% |
| Timing/Temperature Coefficient |
Better than ±0.1% / °C |
| Output Relay |
SPDT contacts - 12A at 125V AC UL E88991 & CSA
LR90143, 10A 125V AC TUV R9452021. |
| Terminations |
Octal plug-in type. |
| Dielectric |
1,200V rms between open contact sets, 1,500V rms between
contacts and operating voltage terminals. |
| Transient Protection |
Protected by silicon transient suppressors responding to
transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts. |
| Operating Temperature |
-20°C to +65°C |
2411sa Specifications, click to view , right click
to download.
Ordering Information
| Model |
Operating Voltage |
| 2411SA |
-2 12VDC
-3 24V DC or AC
-8 115VAC |
Example : 2411A-8 operates from
120VAC |
